Ignite-UX Release Notes (769572-001, March 2014)
Table Of Contents
- Ignite-UX Release Notes
- Contents
- HP secure development lifecycle
- 1 Related information
- 2 Announcements
- 3 Ignite-UX releases
- Version C.7.18.63 (March 2014 AR and Web release)
- Version C.7.17.391 (November 2013 - web release only)
- Version C.7.17.361 (October 2013 – This version is suspended and unsupported.)
- Version C.7.16.283 (March 2013)
- Version C.7.15.254 (September 2012)
- Version C.7.14.274 (March 2012 - web release only)
- Version C.7.14.264 (March 2012)
- Version C.7.13.259 (September 2011 - web release only)
- 4 General features
- 5 Known issues
- 6 Known problems and workarounds
- Required patches
- General issues
- Networking issues
- User interface issues
- Issues when installing from archives
- Common problems loading patches
- make_[tape|net]_recovery issues
- Log file issues
- Security issues
- Cluster File System(CFS) issue
- September 2004 or earlier Itanium based VxVM golden image load failure
- Memory File System(MemFS) issue
- Encrypted Volume and File System(EVFS) issue
- Disk space issues using VxVM & hard drive models ST318203[FL]C
- VxVM used for OS content with non-VxVM root volume install
- Support issue for B.11.11 installs
- 7 Compatibility and installation requirements
- 8 Native language support
- 9 Documentation feedback
The following manual page entries are either added or updated:
• make_net_recovery(1M)
• make_tape_recovery (1M)
• make_sys_image (1M)
Fixes for the following Change Requests:
• QXCR1000943194—Ignite-UX now supports the archive and recovery of files/directories
Access Control Lists(ACL) with pax format.
• QXCR1001116529—Ignite-UX now supports the recovery of a system with legacy I/O
disabled.
• QXCR1001156226—list_expander gives a warning, if relative path is provided for the
archive_content file.
• QXCR1001183336—Ignite-UX recovery will not create duplicate fstab entries for secondary
swap.
• QXCR1001184640—Instance numbers of legacy ctl devices are preserved.
• QXCR1001188398—During recovery, tlinstall will not hang on 11i v2 system
• QXCR1001193316—Ignite-UX now supports the size of the unused recovered logical volume
in vg00 from 128GB to 1TB
• QXCR1001191348—make_net_recovery will not fail on a system with inactive VG with more
than 60 PVs.
• QXCR1001191382—Ignite-UX has been updated so that list_expander shows correct
inclusion/exclusion values for the non-root volume group entries
• QXCR1001194719—The parent directories are not excluded, if a child is excluded in
list_expander.
Version C.7.14.274 (March 2012 - web release only)
The C.7.14.274 release of Ignite-UX supports the following HP-UX release/architecture combinations:
Table 9 HP-UX release/architecture combinations supported on Ignite-UX version C.7.14.274
HP Integrity systemsHP 9000 systemsHP-UX release
NoYesB.11.11
YesYesB.11.23
YesYesB.11.31
After downloading from the web, this version can be installed on any server running on any one
of the above HP-UX releases.
For information about the changes in this version of Ignite-UX, see “Version C.7.14.264 (March
2012)” (page 15).
Version C.7.14.264 (March 2012)
The C.7.14.264 release of Ignite-UX supports the following HP-UX release/architecture combinations:
Version C.7.14.274 (March 2012 - web release only) 15