Ignite-UX Release Notes (5900-3323, October 2013)

• QXCR1001121908. itool now accepts legacy hardware path even if it is longer than the
width of its text box in the 'More Info' window.
• QXCR1001124612. The autoboot status of a client is now gathered along with primary
hardware path information with a single invocation of the setboot command. This will aid
in not overwhelming the Onboard Administrator when multiple installs are going on
simultaneously with virtual partitions on Superdome 2.
• QXCR1001154804. Ignite-UX now supports and detects Oracle ASM configured disks during
the installation alongwith the LVM and VxVM configured disks on the system.
• QXCR1001126779. When the configuration file is hand-edited and has no disk defined in
the root volume group, users will be allowed to correct that in the itool window.
Notes related to known problems with this release:
There are no new known problems.
The following limitation is applicable for the current release:
Starting with March 2011 update of HP-UX 11i v3, Ignite-UX version C.7.12 or above supports
installation of 5.1 SP1 software and configuration of the disks for use.
Though 5.1 VxVM creates disk group with a disk group version of 160 by default (outside Ignite-UX
Environment), Ignite-UX only supports the creation of disk group version 140 during the installation
using 5.1 VxVM software. VxVM disk groups with a disk group version of 160 cannot be restored
using Ignite-UX version C.7.12 or above.
Archive creation of those volumes having disk group version of 160 is not supported by Ignite-UX
and the archive creation process does not display any error/warning indicating that the restore
operation will fail.
Future versions of Ignite-UX may support archive/restore operations of VxVM disk groups with a
disk group version of 160 or above. For the latest information on the Ignite-UX product, refer to
the latest version of the Ignite-UX Release Notes.
Version C.7.12.519 (3/2011)
The C.7.12.519 release of Ignite-UX supports the following HP-UX release/architecture combinations:
Table 10 HP-UX Release/Architecture Combinations Supported on Ignite-UX Version C.7.12.519
HP Integrity systemsHP 9000 systemsHP-UX release
NoYesB.11.11
YesYesB.11.23
YesYesB.11.31
After downloading from the Web, this version can be installed on any server running one of the
above HP-UX releases.
Ignite-UX version C.7.12.519 contains the following new features:
The following manual page entries are either added or updated:
• bootsys(1M)
• ignite-ui(1M)
• instl_adm(1M)
• make_ipf_tape(1M)
• make_medialif(1M)
• make_net_recovery(1M)
• make_sys_image(1M)
Version C.7.12.519 (3/2011) 15