Ignite-UX Reference (March 2010, B3921-90005)

bootsys(1M) bootsys(1M)

when its -u option is used. Note that the AUTO ﬁle is automatically restored if you installed to a different

disk from the original boot disk. The bootsys_prep -u command is executed automatically the ﬁrst

time you boot from a disk on which bootsys has previously been executed:

boot primary isl

ISL> hpux /stand/vmunix

Automatically install B.11.23 on the systems listed, and ignore clients that cannot be accessed:

bootsys -a -R B.11.23 -d client1 client2 client3

WARNINGS

The client’s current network settings are used only during install and they are overwritten by any "ﬁnal" set-

tings in the conﬁguration ﬁles.

FILES

/opt/ignite/boot/Rel_release/INSTALLFS

/opt/ignite/boot/Rel_release/VINSTALLFS

/opt/ignite/boot/Rel_release/WINSTALLFS

The RAM ﬁle system used by PA-RISC install clients. Conﬁguration information available at

client boot time is stored in the ﬁrst 8KB of this ﬁle. Normally the latter two are symbolically

linked to the ﬁrst on the Ignite-UX server.

/opt/ignite/boot/Rel_release/IINSTALLFS

The RAM ﬁle system used by Itanium®-based install clients. Conﬁguration information available

at client boot time is stored in the ﬁrst 8KB of this ﬁle. By default, instl_adm keeps all of the

RAM ﬁle systems in sync with each other.

/opt/ignite/boot/Rel_release/INSTALL

The kernel booted by 32-bit PA-RISC-install clients.

/opt/ignite/boot/Rel_release/VINSTALL

The kernel booted by V-class PA-RISC-install clients.

/opt/ignite/boot/Rel_release/WINSTALL

The kernel booted by 64-bit PA-RISC-install clients.

/opt/ignite/boot/Rel_release/IINSTALL

The kernel booted by Itanium®-based install clients.

/var/opt/ignite/data/INDEX

The INDEX ﬁle used on the Ignite-UX server to deﬁne the conﬁgurations available. The -i

option may be used to specify one of these conﬁgurations.