Ignite-UX Reference (March 2010, B3921-90005)

ignite(5) ignite(5)
link-level address (LLA) followed by the MAC/LLA address of the LAN card.
Device Path Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E4A134B)
Boot0001: Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E4A134B)
Edit Existing Boot Option or make a new entry [E-Edit N-New]:
5) Enter N to add the new boot option.
6) Enter a brief, descriptive boot option name at the message prompt. In this example, the new
boot option is named LAN1.
Enter New Description:
7) Enter a brief description for this boot option.
New BootOption Data. ASCII/Unicode strings only, with max of
240 characters
Enter BootOption Data Type [A-Ascii U-Unicode N-No BootOption]:
8) Enter the data type of this boot option.
Save changes to NVRAM [Y-Yes N-No]:
9) Enter Y to save the new boot option.
LAN1 [Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E1E4ED4)]
Removable Media Boot[Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,...
Load File [EFI Shell [Built-in]]
Load File [Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E1E4ED4)]
Load File [Acpi(HWP0002,100)/Pci(2|0)/Mac(00306E1E3ED6)]
Exit
10) Exit to the EFI Boot Manager menu taking care not to select a boot option, as you will be
forced to re-enter the information for the selected option.
The new boot option should appear in the EFI Boot Manager main menu.
EFI Boot Manager ver 1.10 [14.60]
Please select a boot option
HP-UX Primary Boot: 0/2/2/0.0.0.0
LAN1
EFI Shell [Built-in]
Boot option maintenance menu
Security/Password Menu
Use ˆ and v to change option(s). Use Enter to select an option
11) Select the new boot option, LAN1 in this case, from the list, and then press Enter.
The following is an example of a successful network boot using the new LAN1 boot option,
which ignites the client:
Loading.: LAN1
Running LoadFile()
CLIENT IP: 10.1.52.128 MASK: 255.255.248. DHCP IP: 10.1.53.37
GATEWAY IP: 10.1.48.1
Running LoadFile()
7