Ignite-UX Custom Configuration files

T
he last volumes are defined as follows:
#
# Define /var/tmp
#
logical_volume
{
mount_point = "/var/tmp"
usage=VxFS
size = remaining | 1000Mb
}
#
# Define /opt
#
logical_volume
{
mount_point = "/opt"
usage=VxFS
(sw_sel "Product XYZ - 4GL" ) {
size = remaining | 1500Mb
} else {
size = remaining | 20% free
}
}
#
# Define /home
#
logical_volume
{
mount_point = "/home"
usage=VxFS
size = 500Mb
}
The default configuration files make setting up a disk configuration much more complex than for a
relatively simple disk configuration.
To change the layout of this root volume group to be VxVM, you must set the name of the disk
group to rootdg; instead of giving the user a choice of names, change usage = LVM to usage
= VXVM.
Example Two (selection of disk layout based on hardware)
The configuration example in this section shows a fragment of a disk layout definition that selects
the disk layout based upon the model string and the size of the disk you are installing to (you do
not need to worry about the disk layout itself).
You must first add the new disk layout names into _hp_disk_layout. Remember to add them as
choices because you want the user to be able to select them using Ignite-UX GUI:
#
# Add new disk layout types
#
_hp_disk_layout+= { "Custom configuration rp8400 w/18Gb disks",
"Custom configuration rp8400 w/36Gb disks",
"Custom configuration rp8400 w/72Gb disks",
"Custom configuration rp8400 w/>100Gb disks" }
136