Configuring an Ignite-UX Server under HP Serviceguard
6
Mirror copies 0
Consistency Recovery MWC
Schedule parallel
LV Size (Mbytes) 1008
Current LE 63
Allocated PE 63
Stripes 0
Stripe Size (Kbytes) 0
Bad block on
Allocation strict
IO Timeout (Seconds) default
# lvdisplay /dev/vg01/lvol2
--- Logical volumes ---
LV Name /dev/vg01/lvol2
VG Name /dev/vg01
LV Permission read/write
LV Status available/syncd
Mirror copies 0
Consistency Recovery MWC
Schedule parallel
LV Size (Mbytes) 100000
Current LE 6250
Allocated PE 6250
Stripes 0
Stripe Size (Kbytes) 0
Bad block on
Allocation strict
IO Timeout (Seconds) default
# lvdisplay /dev/vg01/lvol3
--- Logical volumes ---
LV Name /dev/vg01/lvol3
VG Name /dev/vg01
LV Permission read/write
LV Status available/syncd
Mirror copies 0
Consistency Recovery MWC
Schedule parallel
LV Size (Mbytes) 1008
Current LE 63
Allocated PE 63
Stripes 0
Stripe Size (Kbytes) 0
Bad block on
Allocation strict
IO Timeout (Seconds) default
The file systems created above were created with default options. If you require custom
options, you may specify them. If your Ignite server will be storing archives in the default
location, you must ensure the file system mounted at /var/opt/ignite supports
largefiles.
3. Create mount points for the shared file systems
You will need /var/opt/ignite, /opt/ignite/boot, and /etc/opt/ignite on
all cluster nodes with the correct permissions and ownership.