6.0 HP X9000 File Serving Software Installation (TA768-96041, October 2011)

12. Edit the bond0 configuration file and change the IPADDR parameter to the new address:
vi /etc/sysconfig/network-scripts/ifcfg-bond0
13. Restart the network service on all servers:
pdsh -a service network restart
You will be disconnected.
NOTE: If it is not possible to ping the bond0 interface on each server after the network
restarts, it will still be possible to connect a browser session to the iLO to get a console session
to fix the issue, or you can use the KVM console.
14. Change Onboard Administrator addresses:
a. Connect a browser session to Onboard Administrator at http://172.16.1.1 (User=exds
Password=hpinvent).
b. Go to Enclosure settings >Enclosure bays IP addressing >device bays.
c. Change the first IP and click Autofill.
d. Click Apply.
e. Go to the Interconnect bays tab and change the IP in the same way.
f. Go to the Enclosure TCP/IP on the left pane.
g. Change both OA IP addresses (you will be disconnected).
h. Allow the OA one minute to restart, and then check if you can to connect to OA:
http://192.168.1.1.
40 Installing and configuring X9720 systems