5.6.x HP X9000 Series Network Storage System Installation Guide (TA768-96056, December 2011)

If you configured a passive management console, enter the following command to verify the
status of the console:
ibrix_fm -i
Completing the installation
For more information, see the following:
• “Post-installation tasks” (page 46)
• “Adding Linux and Windows X9000 clients” (page 49)
Configuring file serving nodes manually
Use this procedure to configure file serving nodes manually instead of using the template.
1. Log into the system as user root (the default password is hpinvent).
2. When the System Deployment Menu appears, select Join an existing cluster.
3. The Configuration Wizard attempts to discover management consoles on the network and
then displays the results. Select Cancel to configure the node manually.
24 Configuring the management console and file serving nodes on X9300/X9320 systems