5.6.x HP X9000 Series Network Storage System Installation Guide (TA768-96056, December 2011)

4. Select Default Gateway from the menu, and enter the IP Address of the host that will be used
as the default gateway.
5. Select Management Console from the menu. The IP address that you specified earlier for the
management console will be filled in.
6. Select Hostname Template from the menu. Each File Serving Node must have a unique
hostname. The hostname template generates the names automatically, based on the naming
scheme that you select. When you configure the File Serving Nodes, as described in the next
section, the hostname generated by the template will be displayed. You can accept the name
or enter a different name.
Creating a template for configuring file serving nodes 17