HP StoreAll OS 6.5.1 Release Notes

• DL380 G7 NC55x NIC version 4.6.247.5 (9300, 9320)
• BL460c G7 LOM version 4.6.247.5 (9730, X9720)
• HPDG firmware for DG0300FARVV disk drives (300 GB SAS drive for all platforms)
• HPDG firmware for EG0300FAWJD disk drives (300 GB SAS drive for all platforms)
• HPD2 firmware for EG0300FCVBF disk drives (300 GB SAS drive for all platforms)
• HPDA firmware for EG0300FBDBR disk drives (300 GB SAS drive for all platforms)
• HPD9 firmware for EG0300FBVFL disk drives (300 GB SAS drive for all platforms)
• HPDA firmware for EG0450FBDBT disk drives (450 GB SAS drive for 8800)
• HPD9 firmware for EG0450FBVFM drives (450 GB SAS drive for all platforms)
• HPD9 firmware for EG0900FBVFQ disk drives (900 GB SAS drive for 8800)
• HPD2 firmware for MB1000FCWDE disk drives (1 TB SAS drives for X9720)
• HPD2 firmware for MB2000FCWDF and MB3000FCWDH disk drives (2 TB and 3 TB SAS drives,
respectively for 9730)
• HPD4 firmware for MB2000FCZGH disk drives (2 TB SAS drives for 9730 and X9720)
• HPD4 firmware for MB3000FCZGK disk drives (3 TB SAS drives for 9730)
• HPDA firmware for MB2000FBUCL disk drives (2 TB SAS drives for 9730, X9720, and 8800)
• HPDA firmware for MB3000FBUCN disk drives (3 TB SAS drives for 9730, 8800)
• 0003 firmware for ST1000NM0023, ST2000NM0023, and ST3000NM0023 disk drives
(P2000 1 TB and 2 TB, and 3 TB drives, respectively, for 9320)
• A222 firmware for HUS723020ALS640, HUS723030ALS640 disk drives (P2000 2 TB and 3
TB drives, respectively, for 9320)
• 0106 firmware for MK1001TRKB and MK2001TRKB disk drives (P2000 2 TB and 3 TB drives,
respectively, for 9320)
Fixes
NOTE: Version 6.5 also includes all fixes that were included in previous 6.3.x maintenance releases.
For descriptions of those fixes, see the HP StoreAll OS 6.3.3 Release Notes, available at: http://
www.hp.com/support/StoreAllManuals.
• After a reboot, it is possible for a node to no longer have ownership of some segments on a file
system. However, other nodes in the cluster may still send messages to that node about various
segments. Previously, when the node was processing these messages, it could fail. Now, the node
will no longer fail when processing these messages.
• Using the ibrix_fs_tune command, you can now change both the preference and policy for
host groups and individual hosts. Previously you could only change the policy.
• When a node is trying to recover connectivity to one or more nodes in a cluster, the StoreAll OS
software now ensures that, during the file system unmount, data being used by the recovery
process is not accidentally removed. Previously, this caused the node to fail.
• If iLO fails to power down during an automatic node failover, the StoreAll OS Software now runs
the appropriate Linux command to ensure the node is powered down successfully, as long as
communication between nodes is healthy. Previously, this issue caused the failover operation to
fail.
• The automated upgrade script (auto_ibrixupgrade) for version 6.5 includes a new function
called wait_for_fm_initialization. This function ensures that there is enough time for
6.5 7