6.2 HP IBRIX 9000 Storage CLI Reference Guide (TA768-96070, December 2012)

DescriptionOption

A list of one or more logical volume (segment) names, expressed as a comma-separated list

(for example, ilv1,ilv2,ilv3) or a range list (for example, ilv[1-3]).

-s LVLIST

Specifies the tier to which segments are assigned when creating or expanding a file system.-t TIERNAME

Disables 32-bit mode.-w

When used with -i, omits segment details from the output report.-x

Displays the archiving/auditing synchronizer scheduled time for one or all file systems. The

archiving/auditing synchronizer functionality can also be set by modifying the time value for

-Y [-f FSNAME]

Retention Expiration and Autocommit on the Data Retention tab for the Modify Filesystem

Properties window.

Lets you modify the daily time for the archiving/auditing synchronizer to run for a file system.

In this instance, the name of the file system is FSNAME. Use the form hh:mm (a valid hour

-y TIME -f FSNAME

between 0 and 23 inclusive, and a 2-digit minute between 00 and 59 inclusive) to specify

the TIME. The following example sets the starting time for the archiving/auditing synchronizer

to 2 am:

ibrix_fs -y 02:00 -f ibrixfs1

The archiving/auditing synchronizer functionality can also be set by modifying the time value

for Retention Expiration and Autocommit on the Data Retention tab for the Modify Filesystem

Properties window.

Shows the usage for this command.-?