6.0 HP X9720 Network Storage System Administrator Guide (AW549-96034, December 2011)

Synchronizing information on file serving nodes and the configuration
database
To maintain access to a file system, file serving nodes must have current information about the file
system. HP recommends that you execute ibrix_health on a regular basis to monitor the health
of this information. If the information becomes outdated on a file serving node, execute ibrix_dbck
-o to resynchronize the server’s information with the configuration database. For information on
ibrix_health, see “Monitoring cluster health” (page 53).
NOTE: The ibrix_dbck command should be used only under the direction of HP Support.
To run a health check on a file serving node, use the following command:
<installdirectory>/bin/ibrix_health -i -h HOSTLIST
If the last line of the output reports Passed, the file system information on the file serving node
and management console is consistent.
To repair file serving node information, use the following command:
<installdirectory>/bin/ibrix_dbck -o -f FSNAME [-h HOSTLIST]
To repair information on all file serving nodes, omit the -h HOSTLIST argument.
126 Troubleshooting