6.0 HP X9000 File Serving Software Installation (TA768-96041, October 2011)

4. The File Serving Node Configuration Menu appears.
5. The Cluster Configuration Menu lists the configuration parameters that you need to set. Use
the up and down arrow keys to select an item in the list. When you have made your select,
press Tab to move to the buttons at the bottom of the dialog box, and press the spacebar to
go to the next dialog box.
6. Select Management Console from the menu, and enter the IP address of the management
console. This is typically the address of the management console on the cluster network.
Configuring file serving nodes manually 25