5.6.x HP X9000 Series Network Storage System Installation Guide (TA768-96056, December 2011)

Select the role for the network and enter the IP address information the network will use.
10. Using the procedure in the above step, create templates for user and custom networks as
necessary.
11. When you have completed your entries on the Cluster Configuration Menu, select Continue.
12. Verify the template on the confirmation screen and select Commit. The values are applied
when you configure each file serving node.
Using the template to configure file serving nodes
This procedure applies the template that you created to the file serving nodes. Perform this procedure
on each node.
Using the template to configure file serving nodes 21