5.6.x HP X9000 Series Network Storage System Installation Guide (TA768-96056, December 2011)

12. To complete the bond configuration, enter a space to select the Cluster Network role. Then
enter the IP address and netmask information that the network will use.
Repeat this procedure to create a bonded user network (typically bond1, or a VIF on bond1
for a 10GbE network that is configured in X9000 Software) and any custom networks as
required.
13. If this cluster will use the agile management console configuration, select Agile management
from the menu. On the Configure Agile Management dialog box, enter a space to select
Configuring the management console 13