5.5 HP StorageWorks X9720 Network Storage System Administrator Guide (AW549-96026, March 2011)

If you configured a passive management console, enter the following command to verify the
status of the console:
ibrix_fm -i
IMPORTANT:
Next, go to Completing the restore on a file serving node.
Configuring the management console on the dedicated
(non-agile) Management Server blade
This procedure is intended for systems that are not using the agile management console configuration,
and instead, the standard management console is configured on the Management Server blade.
To configure the management console, complete the following steps:
1. Log into the system as user root (the default password is hpinvent). The Management Console
Configuration Wizard starts automatically. (You can also launch the Wizard manually by entering
the command /usr/local/ibrix/autocfg/bin/menu_wizard.)
When using the menu, use the Up and Down arrow keys to select an item in the list. When you
have made your selection, press Tab to go to the buttons at the bottom of the dialog box, and
then press Space to activate your selection.
2. When the System Deployment Menu appears, select Form a new cluster.
X9720 Network Storage System Administrator Guide 161