HSG80 Enterprise/Modular Storage RAID Array Fibre Channel Solution Software V8.7A for Windows Release Notes (AA-RH0QL-TE, July 2003)

ACS Feature Support
Release Notes – HSG80 Enterprise/Modular Storage RAID Array Fibre Channel Solution
Software Version 8.7A for Windows
40
23. If the CCL was disabled in step 4, enable it by using the following command:
HSGA> SET THIS_CONTROLLER COMMAND_CONSOLE_LUN
24. Disconnect the PC or terminal from the maintenance port of Controller A.
SWCC Agent Configuration Utility and the Displayed ACS Firmware
Version
After upgrading from ACS V8.6 (any variant or patch) to ACS V8.7-1, the SWCC
Agent Configuration utility displays the previous ACS version before the upgrade
(same variant) on the NT Agent Configuration Step 3 of 3 screen.
NOTE: If you installed ACS 8.7 and then upgraded to ACS 8.7-1, SWCC displays the proper
ACS version number on the NT Configuration Step 3 of 3 dialog box.
Figure 2 shows where the ACS version displays 3 the previous version (before the
upgrade) in SWCC after you upgrade from ACS V8.6 to V8.7-1.
Figure 2: Location of the SWCC version number when upgrading from ACS
V8.6 to V8.7-1
3