HSG80 Array Controller ACS Version 8.2 User Guide (EK-HSG80-UG. B01, July 1998)

Event Reporting: Templates and Codes D–87
D0 01 Disconnect timeout.
D0 02 Chip command timeout.
D0 03 Byte transfer timeout.
D1 00 Bus errors.
D1 02 Unexpected bus phase.
D1 03 Disconnect expected.
D1 04 ID Message not sent.
D1 05 Synchronous negotiation error.
D1 07 Unexpected disconnect.
D1 08 Unexpected message.
D1 09 Unexpected Tag message.
D1 0A Channel busy.
D1 0B Device initialization failure. Device sense data available.
D2 00 Miscellaneous SCSI driver error.
D2 03 Device services had to reset the bus.
D3 00 Drive SCSI chip reported gross error.
D4 00 Non-SCSI bus parity error.
D5 02 Message Reject received on a valid message.
D7 00 Source driver programming error.
E0 03 Fault Manager detected an unknown error code.
E0 06 Maximum number of errors for this I/O exceeded.
E0 07 Drive reported recovered error without transferring all data.
Table D–7 ASC and ASCQ Codes (Continued)
ASC Code ASCQ Code Description