HSG80 Array Controller ACS Version 8.2 User Guide (EK-HSG80-UG. B01, July 1998)

CLI Commands B–49

CONFIGURATION SAVE

Forces a current copy of configuration information in a controller’s

non-volatile memory into a configuration file on a disk. This allows the

user to determine when a copy of the configuration is saved. Use this

command to explicitly save a single controller’s configuration. The

command takes effect immediately. In a dual-redundant configuration,

issue this command to both controllers.

Use the INITIALIZE container-name SAVE_CONFIGURATION

command to set up the location of the configuration file on disk.

Syntax

CONFIGURATION SAVE