HSG80 Array Controller ACS Version 8.2 User Guide (EK-HSG80-UG. B01, July 1998)

6–22 HSG80 User’s Guide
16. Set the subsystem date and time. In single controller configurations, set
“this controller.” In dual-redundant controller configurations, set “this
controller,” then set the “other controller” with the following command:
SET THIS_CONTROLLER TIME=dd-mmm-yyyy:hh:mm:ss
SET OTHER_CONTROLLER TIME=dd-mmm-yyyy:hh:mm:ss
17. Disconnect the PC or terminal from the controller’s maintenance port.