HSG80 ACS Solution Software Version 8.7 for Compaq OpenVMS Installation and Configuration Guide

Index
Index–4 HSG80 ACS Solution Software Version 8.7 for Compaq OpenVMS Installation and
Configuration Guide
G
geometry
initialize switches
2–33
Geometry parameters
2–33
H
Host access
restricting in multiple-bus failover mode
disabling access paths
1–16
host access
restricting by offsets
multiple-bus failover
1–18
restricting in multiple-bust failover mode
1–16
restricting in transparent failover mode
disabling access paths
1–15
host adapter
installation
3–6
preparation
3–6
host connections
1–9
naming
1–10
Host storage configuration
verify
5–29
HSG Agent
install and configure
4–1
network connection
4–3
overview
4–2
remove agent
4–12
I
initialize switches
changing
fabric topology
5–28
CHUNKSIZE
2–30
geometry
2–33
NOSAVE_CONFIGURATION
2–32
SAVE_CONFIGURATION
2–32
Insight Manager
B–13
installation
controller verification
5–9, 5–17
invalid network port assignments
B–8
there is no disk in the drive message
B–9
installation verification
CLI commands
5–9, 5–17
installing
Agent
4–6, 4–8
integrating SWCC
B–13
invalid network port assignments
B–8
J
JBOD 2–15
L
LOCATE
find devices
2–34
location
cache module
1–2, 1–3
controller
1–2, 1–3
LUN IDs
general description
1–21
M
maintenance port connection
establishing a local connection
5–2
illustrated
5–2
mapping storagesets
2–33
messages
there is no disk in the drive
B–9
mirrored caching
enabling
1–8
illustrated
1–8
mirrorset switches
changing
fabric topology
5–28
mirrorsets
planning considerations
2–21
important points
2–22
switches
2–29
Model 2200 Storage Maps
examples
2–7
moving storagesets
7–5
mulitple-bus failover
restricting host access by offsets
1–18
multiple-bus failover
1–5
ADD CONNECTIONS command
1–12