HSG80 ACS Solution Software Version 8.7 for Compaq OpenVMS Installation and Configuration Guide

Using CLI for Configuration
6–5HSG80 ACS Solution Software Version 8.7 for Compaq OpenVMS Installation and
Configuration Guide
6–5
SET THIS SCSI_VERSION=SCSI-3
SET THIS IDENTIFIER=88
SET THIS PORT_1_TOPOLOGY=FABRIC
SET THIS PORT_2_TOPOLOGY=FABRIC
SET OTHER PORT_1_TOPOLOGY=FABRIC
SET OTHER PORT_2_TOPOLOGY=FABRIC
SET THIS ALLOCATION_CLASS=1
RESTART OTHER
RESTART THIS
SET THIS TIME=10-Mar-2001:12:30:34
RUN FRUTIL
Y
Plug serial cable from maintenance terminal into bottom controller.
NOTE: Bottom controller (B) becomes “this” controller.
RUN FRUTIL
Y
SET THIS MIRRORED_CACHE
NOTE: This command causes the controllers to restart.
SET THIS PROMPT=“BTVS BOTTOM”
SET OTHER PROMPT=“BTVS TOP”
SHOW THIS
SHOW OTHER
Plug in the Fibre Channel cable from thefirst adapter in host “RED.”
SHOW CONNECTIONS
Do you intend to replace this controller's cache
battery? Y/N [Y]
Do you intend to replace this controller's cache
battery? Y/N [Y]