HSG80 ACS Solution Software Version 8.7 for Compaq OpenVMS Installation and Configuration Guide

Installing and Configuring HSG Agent
4–12 HSG80 ACS Solution Software Version 8.7 for Compaq OpenVMS Installation and
Configuration Guide
Removing the Agent
Instructions on how to remove the HSG Agent from OpenVMS are the following:
Warning: This OpenVMS uninstallation will remove all configuration files!
To fully remove agent software, including client and storage data:
1. Halt SWCC agent
2. $ @sys$manager:swcc_config
3. Choose 3) Agent Disable/Stop
4. Choose 4) Uninstall Agent
NOTE: This OpenVMS uninstallation All client and storage files will be preserved.
To remove agent software only and save client and storage data:
1. Halt SWCC agent
2. $ @sys$manager:swcc_config
3. Choose 3) Agent Disable/Stop
4. Choose E) Exit configuration procedure.
5. $ product remove swcc
CAUTION: Do not uninstall the Agent if you want to preserve configuration
information. If you only want to install an upgrade, stop the Agent, and then install the
new version. Older versions will be automatically removed before the update, but all
configuration information will be preserved.
1. Enter the following at the command prompt:
$ @sys$manager:swcc_config
The Configuration menu appears.
2. To remove the Agent, select option 4.
3. Select option Y. The host tells you that the Agent has been stopped and SWCC is
being disabled. You are then asked if you want to continue.
4. Select option Y.