HSG80 ACS Solution Software Version 8.7 for Compaq OpenVMS Installation and Configuration Guide

Installing and Configuring HSG Agent
4–11HSG80 ACS Solution Software Version 8.7 for Compaq OpenVMS Installation and
Configuration Guide
4–11
You can change your configuration using the SWCC Agent Configuration menu. To
access this menu, enter the following command:
$ @sys$manager:swcc_config
The following is an example of the Agent Configuration menu:
Password It must be a text string that has 4 to 16
characters. It can be entered from the client
system to gain configuration access. Accessing
the SWCC Agent Configuration menu can
change it.
SWCC Agent for HS* Controllers Configuration Menu
Agent is enabled as TCP/IP Services for OpenVMS
service.
Agent is now: active
Agent Admin Options:
1)Change Agent password
2)Agent Enable/Start
3)Agent Disable/Stop
4)Uninstall Agent
Client Options:
5)Add a Client
6)Remove a Client
7)View Clients
Storage Subsystem Options:
8)Add a subsystem
9)Remove a subsystem
10)View subsystems
E)Exit configuration procedure
Table 4–3: Information Needed to Configure Agent (Continued)
Term/Procedure Description