HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Troubleshooting Information
55HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
0x09 Short record.
0x0a Long record.
0x0b Tape flow interlocked condition.
0x0c Some of the data is missing.
0x0d Data is good, command retried.
0x0e Data is good, device retried.
0x0f Device reported media error.
0x10 From device sense data.
0x11 Device reported media error.
0x12 Device reported write protect.
0x13 Disk reported ILI, FM or EOM.
0x14 Device reported.
0x15 See sense data for error.
0x16 LUN responded that it was not ready.
0x17 No response from targets.
0x18 Retry requested by ER thread.
0x19 Init only—DWD which initiated reset.
0x20 Deferred error for tape DWD.
0x21 Data is good, recommend revector.
0x22 Data is good, recommend re-write.
0x23 Request sense failed for command.
0x24 Request sense failed for command.
0x25 Media may have changed.
0x26 A drive reported forced error.
The following codes are disk-specific and are never seen by VA.
0x27 An unexpected SCSI status byte was returned in response to a CDI
SCSI command.
0x28 A CDI MSJ OUT byte was unexpectedly rejected by the device.
0x29 A severe error occurred for a CDI SCSI command.
Table 10: DWD Status Codes (Continued)
Code Description