HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Last Failure Codes
266 HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
80030100 DILX tried to release a facility that was not reserved by DILX .01
80040100
DILX tried to change the unit state from Maintenance mode to Normal
mode but was rejected because of insufficient resources.
01
80050100
DILX tried to change the USB unit state from Maintenance mode to
Normal mode, but
DILX never received notification of a successful state
change.
01
80060100
DILX tried to switch the unit state from Maintenance mode to Normal
mode but was not successful.
01
80070100
DILX aborted all commands through VA$D_ABORT( ), but the HTBs
have not been returned.
01
80090100
DILX received an end message that corresponds to an OpCode not
supported by
DILX .
01
800A0100
DILX was not able to restart HIS timer. 01
800B0100
DILX tried to issue an I/O for an OpCode not supported. 01
800C0100
DILX tried to issue a oneshot I/O for an OpCode not supported. 01
800D0100 A
DILX device control block contains an unsupported UNIT_STATE.01
800F0100 A
DILX command completed with a sense key that DILX does not support. 01
80100100
DILX could not compare buffers because no memory was available from
EXEC$ALLOCATE_MEM_ZEROED.
01
80110100 While
DILX was de-allocating its deferred error buffers, at least one buffer
could not be found.
01
80120100
DILX expected an EIP to be on the receive EIP queue, but no EIPs were in
the queue.
01
80130100
DILX was asked to fill a data buffer with an unsupported data pattern. 01
80140100
DILX could not process an unsupported answer in
DX$REUSE_PARAMS( ).
01
83020100 An unsupported message type or terminal request was received by the
CONFIG virtual terminal code from the CLI.
01
83030100 Not all ALTER_DEVICE requests from the
CONFIG utility completed
within the timeout interval.
01
Table 56: Last Failure Codes and Repair Action Codes (Sheet 53 of 55)
Last
Failure
Code
Description
Repair
Action
Code