HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Last Failure Codes
250 HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
081B0101 Bad remote work received on remote work queue:
Last failure parameter [0] contains the ID type value that was received on
the NVFOC remote work queue.
01
081C0101 Bad member management work received:
Last failure parameter [0] contains the bad member management value
that was detected.
01
081D0000 In order to go into Mirrored Cache mode, the controllers must be
restarted.
00
081E0000 In order to go into Non-mirrored Cache mode, the controllers must be
restarted.
00
081F0000 An FLM$INSUFFICIENT_RESOURCES error was returned from a
Facility Lock Manager (FLM) lock or unlock call.
00
08200000 Expected restart so the WRITE_INSTANCE may recover from a
configuration mismatch.
00
08210100 Unable to allocate memory to setup NVFOC lock and unlock notification
routines.
01
09010100 Unable to acquire memory to initialize the FLM structures. 01
09640101 Work that was not FLM work was found on the FLM queue. Bad format is
detected or the formatted string overflows the output buffer:
Last failure parameter [0] contains the work found.
01
09650101 Work that was not FLM work was found on the FLM queue:
Last failure parameter [0] contains the structure found.
01
09670101 Local FLM detected an invalid facility to act upon:
Last failure parameter [0] contains the facility found.
01
09680101 Remote FLM detected an error and requested the local controller to
restart:
Last failure parameter [0] contains the reason for the request.
01
09C80101 Remote FLM detected an invalid facility to act upon:
Last failure parameter [0] contains the facility found.
01
Table 56: Last Failure Codes and Repair Action Codes (Sheet 37 of 55)
Last
Failure
Code
Description
Repair
Action
Code