HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)
Last Failure Codes
246 HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
04030102 The Unit State Block (USB) index supplied in the EIP is larger than the
maximum number of USBs:
Last failure parameter [0] contains the Instance Code value.
Last failure parameter [1] contains the USB index value.
01
04040103 The Event log format found in V_FM_TEMPLATE_TABLE is not
supported by the Fault Manager. The bad format was discovered while
trying to fill in a supplied EIP:
Last failure parameter [0] contains the Instance Code value.
Last failure parameter [1] contains the format code value.
Last failure parameter [2] contains the requester error table index value.
01
04050100 The Fault Manager could not allocate memory for its EIP buffers. 01
040A0100 The caller of FM$CANCEL_SCSI_DE_NOTIFICATION passed an
address of a deferred error notification routine that does not match the
address of any routines for which deferred error notification is enabled.
01
040E0100 FM$ENABLE_DE_NOTIFICATION was called to enable deferred error
notification, but the specified routine was already enabled to receive
deferred error notification.
01
040F0102 The EIP->GENERIC.MSCP1.FLGS field of the EIP passed to
FM$REPORT_EVENT contains an invalid flag.
Last failure parameter [0] contains the Instance Code value.
Last failure parameter [1] contains the value supplied in the
EIP->GENERIC.MSCP1.FLGS field.
01
04100101 Unexpected template type found during FMU_DISPLAY_ERRLOG
processing.
Last failure parameter [0] contains the unexpected template value.
01
04110101 Unexpected Instance Code found during FMU_MEMERR_REPORT
processing.
Last failure parameter [0] contains the unexpected Instance Code value.
01
04120101 CLIB$SDD_FAO call failed:
Last failure parameter [0] contains the failure status code value.
01
Table 56: Last Failure Codes and Repair Action Codes (Sheet 33 of 55)
Last
Failure
Code
Description
Repair
Action
Code