HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Last Failure Codes

242 HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide

03450188 A Master Data Parity Error was detected by a port:

Last failure parameter [0] contains the PCB PORT_PTR value.

Last failure parameter [1] contains the PCB copies of the device port

DCMD/DBC registers.

Last failure parameter [2] contains the PCB copy of the device port

DNAD register.

Last failure parameter [3] contains the PCB copy of the device port DSP

Last failure parameter [4] contains the PCB copy of the device port DSPS

Last failure parameter [5] contains the PCB copies of the device port

DSTAT/SSTAT0/SSTAT1/SSTAT2 registers.

Last failure parameter [6] contains the PCB copies of the device port

DFIFO/ISTAT/SBCL/RESERVED registers.

Last failure parameter [7] contains the PCB copies of the device port

SIST0/SIST1/SXFER/SCNTL3 registers.

03470100 Insufficient memory available for target block allocation. 01

03480100 Insufficient memory available for device port info block allocation. 01

03490100 Insufficient memory available for automatic configuration buffer

allocation.

034A0100 Insufficient memory available for PUB allocation. 01

034B0100 (No description) 01

034C0100 Insufficient memory available for static structure allocation. 01

034D0100 DS init DWDs exhausted. 01

034E2080 Diagnostics report all device ports are broken. 20

034F0100 Insufficient memory available for reselect target block allocation. 01

03500100 Insufficient memory available for command disk allocation. 01

03520100 A failure resulted after an attempt was made to allocate a DWD for use

by DS Command Data Interface (CDI).

Table 56: Last Failure Codes and Repair Action Codes (Sheet 29 of 55)

Last

Failure

Code

Description

Repair

Action

Code