HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Last Failure Codes

235HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide

030B0188 A dip error was detected after PCB_BUSY was set:

Last failure parameter [0] contains the Process Controls Block (PCB)

PORT_PTR value.

Last failure parameter [1] contains the new info

NULL-SSTAT0-DSTAT-ISTAT.

Last failure parameter [2] contains the PCB copy of the device port DMA

Byte Counter (DBC) register.

Last failure parameter [3] contains the PCB copy of the device port DMA

Next Address Data (DNAD) register.

Last failure parameter [4] contains the PCB copy of the device port DMA

SCRIPTS Pointer (DSP) register.

Last failure parameter [5] contains the PCB copy of the device port DMA

SCRIPTS Pointer Saved (DSPS) register.

Last failure parameter [6] contains the PCB copies of the device port

SSTAT2/SSTAT1/SSTAT0/DSTAT registers.

Last failure parameter [7] contains the PCB copies of the device port

LCRC/RESERVED/ISTAT/DFIFO registers.

031E0100 Cannot find IN_ERROR DWD on in-process queue. 01

031F0100 Either DWD_PTR is NULL or bad value in dsps. 01

03280100 SCSI CDB contains an invalid group code for a transfer command. 01

03290100 The required Event Information Packet (EIP) or DWD were not supplied to

the Device Services error logging code.

032B0100 A DWD was supplied with a NULL PUB pointer. 01

03320101 An invalid code was passed to the error recovery thread in the

ERROR_STAT field of the PCB:

Last failure parameter [0] contains the PCB ERROR_STAT code.

Table 56: Last Failure Codes and Repair Action Codes (Sheet 22 of 55)

Last

Failure

Code

Description

Repair

Action

Code