HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Last Failure Codes

220 HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide

01910084 A cache module was inserted or removed:

Last failure parameter [0] contains the value of the actual cache module

A exists state.

Last failure parameter [1] contains the value of the actual cache module

B exists state.

Last failure parameter [2] contains the value of the expected cache

module A exists state.

Last failure parameter [3] contains the value of the expected cache

module B exists state.

01920186 Unable to read the FX because a device port or a host port locked the

PDAL bus:

Last failure parameter [0] contains the value of read diagnostic register

Last failure parameter [1] contains the value of read diagnostic register

Last failure parameter [2] contains the value of read diagnostic register

Last failure parameter [3] contains the value of write diagnostic register

Last failure parameter [4] contains the value of write diagnostic register

Last failure parameter [5] contains the IBUS address of error register.

Table 56: Last Failure Codes and Repair Action Codes (Sheet 7 of 55)

Last

Failure

Code

Description

Repair

Action

Code