HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Instance Codes
207HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
0C323F02 The quadrant 2 memory controller (cache B0)
detected a multibit ECC error.
14 3F
0C333F02 The quadrant 3 memory controller (cache B1)
detected a multibit ECC error.
14 3F
0C403E02 The quadrant 0 memory controller (cache A0)
detected a firewall error.
14 3E
0C413E02 The quadrant 1 memory controller (cache A1)
detected a firewall error.
14 3E
0C423E02 The quadrant 2 memory controller (cache B0)
detected a firewall error.
14 3E
0C433E02 The quadrant 3 memory controller (cache B1)
detected a firewall error.
14 3E
0E010064 A remote copy set was created specified by the
Remote Copy Set Name field. The initiator unit of the
remote copy set is specified by the initiator WWLID
field.
90 00
0E020064 The remote copy set, specified by the Remote Copy
Set Name field, was deleted by the operator.
90 00
0E030064 The logical unit, specified by the target WWLID,
transitioned from the Normalizing or Copying state to
the Normal state.
90 00
0E050064 The logical unit, specified by the target WWLID, was
added to the remote copy set (specified by the Remote
Copy Set Name field). The new target member is now
in the Normalizing state.
90 00
0E068A01 The logical unit, specified by the target WWLID, was
removed from the remote copy set (specified by the
Remote Copy Set Name field).
90 8A
0E078A01 The logical unit, specified by the target WWLID, was
removed from the remote copy set (specified by the
Remote Copy Set Name field). The target was
removed by the operator.
90 8A
Table 53: Instance Codes and Repair Action Codes (Sheet 27 of 30)
Instance
Code
Description Template
Repair
Action
Code