HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Utilities and Exercisers
114 HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
Device port configuration
VTDPY displays device port configuration information in a block of tabular data
in the Default and device screens only. The information is arranged in a grid with
the port numbers listed along the vertical axis and the targets on each port listed
along the horizontal axis. The word port is spelled out vertically to denote the port
numbers. The screen shows the usage of each port and target combination with a
code in the array as shown below. Field information is explained in Table 29 on
page 115.
Figure 23: Sample port configuration information
LS Log state:
LG = Logging.
MG = Merging.
CP = Copying.
NR = Normal.
NZ = Normalizing.
%MRG Percentage of merge process completed.
%CPY Percent of copy process completed.
Table 28: Remote Display Column Definitions—ACS P Variant Only (Continued)
Column Contents
Target
111111
123456789012345
P1DDDD Hh
o2DDDD Hh
r3DDDD Hh
t4DDDD Hh
5DDDD Hh
6DDDD Hh