User Manual - A3661-90001

Unsolicited Event Log 6-43
Troubleshooting
0x689 Sector Reconstructed On a read from a RAID-1 mirrored pair, a corrupted sector
was reconstructed.
0x68A Uncorrectable Parity
Sector
A hard error on a parity sector could not be corrected.
0x68B Uncorrectable Data
Sector
A hard error on a data sector could not be corrected.
0x68C Hard Read Checksum
Error
A hard checksum error was detected on a data transfer from
the host.
0x68D Soft Read Checksum
Error
A soft checksum error was detected on a data transfer from
the host.
0x68E Inconsistent Stripe Inconsistent write or time stamps were detected in a RAID
group.
0x68F Inconsistent Time
Stamps
Inconsistent time stamps were detected in a RAID group on a
verify.
0x690 Drive Failed A disk module was shut down.
0x691 Checksum Error on
Device Read
A checksum error was detected on a read from an individual
disk. No data transfer was involved.
0x692 Incoherent Stripe Data and parity in a RAID group were inconsistent.
0x693 Uncorrectable Stripe Inconsistent write or time stamps in a RAID group could not
be corrected.
0x694 Parity Invalidated Parity in a RAID group has been invalidated.
0x695 Uncorrectable Sector An uncorrectable sector was detected on a RAID-1 mirrored
pair.
0x696 Mirror Sector Invalidated A sector on a RAID-1 mirrored pair was invalidated on a
rebuild.
0x6CA Front End Fibre Loop
Bad
The Fibre Channel front end has gone off line due to the
receipt of an unexpected loop event.
0x6CB Front End Fibre Initiator
Gone
The SP attempted to communicate with an initiator that has
ceased responding.
0x6CC Front End Fibre Link
Down
The Fibre front end is down.
0x6CD Front End Fibre Link Up The Fibre front end is up.
0x6E0 Front End Fibre Loop
Event
A Front End hub port has been closed.
0x6E1 Front End Fibre Loop
Event
A front end hub port has been opened.
Table 6-8 Informational Codes (Continued)
Event code Event code name Description