User Guide
8QVROLFLWH G (YHQW/RJ 8-35
Troubleshooting
0x68E Inconsistent Stripe. Inconsistent write or time stamp were detected in a RAID
group.
0x68F Inconsistent Time Stamps. Inconsistent time stamps were detected in a RAID
group on a verify.
0x690 Drive Failed. A drive was shut down.
0x691 Checksum Error on Device read. A checksum error was detected on a read from
an individual disk. There was no data transfer involved.
0x692 Incoherent Stripe. Data and parity were not consistent in a RAID group.
0x693 Uncorrectable Stripe. Inconsistent write or time stamps could not be corrected in
RAID group.
0x694 Parity Invalidated. Parity has been invalidated in a RAID group.
0x695 Uncorrectable Sector. An uncorrectable sector was detected on a RAID-1
mirrored pair.
0x696 Mirror Sector Invalidated. A sector on a RAID-1 mirrored pair was invalidated on
a rebuild.
7DEOH 7KUHVKROGHG&RGHV
Event code Description Recommended threshold
0x801 Soft SCSI error. This code indicates
that an abnormal SCSI bus or disk
drive event was detected. A retry of the
operation cleared the condition.
Notify the user after 25 errors/day/
FRU.
0x802 Illegal SCSI Bus interrupt. An
inconsistent interrupt situation has
been detected on the controller.
Notify the user after 10 errors/month/
FRU.
0x803 Recommend Disk Replacement. IBM only.
0x804 Single Bit Error. The SP’s tolerance level for single bit
errors in the write cache has been
exceeded.
7DEOH ,QIRUPDWLRQDO&RGHVFRQWªG
Event code Description