OS SNMP Support Manual (620-000131-620, April 2005)

MIB Definitions: MIB-II

2-41

McDATA SNMP Support

ipRouteMetric5

Type INTEGER

Access RW

Description An alternate routing metric for this route. The semantics of this

metric are determined by the routing-protocol specified in the route's

ipRouteProto value. If this metric is not used, its value should be set

to -1.

ipRouteInfo

Type OBJECT IDENTIFIER

Access R

Description A reference to MIB definitions specific to the particular routing

protocol which is responsible for this route, as determined by the

value specified in the route's ipRouteProto value. If this information

is not present, its value should be set to the OBJECT IDENTIFIER { 0 0

}, which is a syntactically valid object identifier, and any conforming

implementation of ASN.1 and BER must be able to generate and

recognize this value.

IP Address Translation

Table

The IP address translation table contain the IpAddress to physical

address equivalences. Some interfaces do not use translation tables

for determining address equivalences (e.g., DDN-X.25 has an

algorithmic method); if all interfaces are of this type, then the

Address Translation table is empty, i.e., has zero entries.

ipNetToMediaIfIndex

Type INTEGER

Access RW

Description The interface on which this entry's equivalence is effective. The

interface identified by a particular value of this index is the same

interface as identified by the same value of ifIndex.

ipNetToMediaPhysAddress

Type PhysAddress

Access RW