FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manual (620-000131-620, April 2005)

E
Groups in MIB II
E-5
MIB II
For systems including OSI protocols, layers 5 and 6 may also be
counted.
Sequence
::= { system 7 }
Interfaces group
Implementation of the Interfaces group is mandatory for all systems.
ifNumber
Syntax INTEGER
Access read-only
Status mandatory
Description The number of network interfaces (regardless of their current state)
present on this system.
Sequence
::= { interfaces 1 }
Interfaces table The Interfaces table contains information on the entity's interfaces.
Each interface is thought of as being attached to a `subnetwork'. Note
that this term should not be confused with `subnet' which refers to an
addressing partitioning scheme used in the Internet suite of
protocols.
ifTable
Syntax SEQUENCE OF IfEntry
Access not-accessible
Status mandatory
Description A list of interface entries. The number of entries is given by the value
of ifNumber.
Sequence
::= { interfaces 2 }
ifEntry
Syntax IfEntry
Access not-accessible
Status mandatory