OS SNMP Support Manual (620-000131-620, April 2005)

Event Group

B-57

FC Management MIB

Description Count of times that FRJT was returned to this port as a result of a

Frame that was rejected at the destination N_Port. Note, This is the

total for all classes and is a Fibre Channel only stat.

Sequence

::= { connUnitPortStatEntry 13 }

connUnitPortStatCountClass1RxFrames

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description Count of Class 1 Frames received at this port. Note, this is a Fibre

Channel only stat.

Sequence

::= { connUnitPortStatEntry 14 }

connUnitPortStatCountClass1TxFrames

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description Count of Class 1 Frames transmitted out this port. Note, this is a Fibre

Channel only stat.

Sequence

::= { connUnitPortStatEntry 15 }

connUnitPortStatCountClass1FBSYFrames

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description Count of times that FBSY was returned to this port as a result of a

Class 1 Frame that could not be delivered to the other end of the link.

This occurs if either the Fabric or the destination port is temporarily

busy. FBSY can only occur on SOFc1 frames (the frames that

establish a connection). Note, this is a Fibre Channel only stat.

Sequence

::= { connUnitPortStatEntry 16 }