OS SNMP Support Manual (620-000131-620, April 2005)

A-58

E/OS SNMP Support Manual

Fibre Alliance MIB

Description Count of instances of synchronization loss detected at port. This

count is part of the Link Error Status Block (LESB). (FC-PH 29.8).

Note, this is a Fibre Channel only stat.

Sequence

::= { fcConnUnitPortStatEntry 43 }

fcConnUnitPortStatInvOrderedSets

Syntax Counter64

Max-Access read-only

Status current

Description Count of invalid ordered sets received at port. This count is part of

the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre

Channel only stat.

Sequence

::= { fcConnUnitPortStatEntry 44 }

fcConnUnitPortStatFramesTooLong

Syntax Counter64

Max-Access read-only

Status current

Description Count of frames received at this port where the frame length was

greater than what was agreed to in FLOGI/PLOGI. This could be

caused by losing the end of frame delimiter. Note, this is a Fibre

Channel only stat.

Sequence

::= { fcConnUnitPortStatEntry 45 }

fcConnUnitPortStatFramesTooShort

Syntax Counter64

Max-Access read-only

Status current

Description Count of frames received at this port where the frame length was less

than the minimum indicated by the frame header - normally 24 bytes,

but it could be more if the DFCTL field indicates an optional header

should have been present. Note, this is a Fibre Channel only stat.

Sequence

::= { fcConnUnitPortStatEntry 46 }