OS SNMP Support Manual (620-000131-620, April 2005)

FA MIB

A-29

Fibre Alliance MIB

gbic(3),

embedded(4),

glm(5),

gbicSerialId(6),

gbicNoSerialId(7),

gbicNotInstalled(8),

smallFormFactor(9) }

Max-Access read-only

Status current

Description The module type of the port connector. This object refers to the

hardware implementation of the port. The embedded value (4)

means 'fixed' (e.g., oneXnine).

Sequence

::= { fcConnUnitPortEntry 8 }

fcConnUnitPortWwn

Syntax FcNameId

Max-Access read-only

Status current

Description The World Wide Name of the port if applicable, otherwise empty

string.

Sequence

::= { fcConnUnitPortEntry 9 }

fcConnUnitPortFCId

Syntax OCTET STRING (SIZE(3))

Max-Access read-only

Status current

Description This is the assigned Fibre Channel ID of this port. This value is

expected to be a Big Endian value of 24 bits. If this is loop, then it is

the ALPA that is connected. If this is an eport, then it will only

contain the domain ID left justified, zero filled. If this port does not

have a Fibre Channel address, return all bits set to 1.

Sequence

::= { fcConnUnitPortEntry 10 }