OS SNMP Support Manual (620-000131-620, April 2005)

2-118

E/OS SNMP Support Manual

McDATA SNMP Support

F_Port 2 = Fabric(2)

FL_Port 1 = Loop(1)

E_Port 2 = Fabric(2)

H_Port 1 = Loop(1)

B_Port 2 = Fabric(2)

Access R

Description Bit mask that specifies the driver level protocol(s) that are currently

operational. If this is not applicable, return all bits set to zero. This

object has the same definition as

fcConnUnitPortProtocolCap.

FcConnUnitPortNodeWwn

(added from Mib3.0)

Type FcNameId

Product Mapping switch WWN

Access R

Description The Node World Wide Name of the port if applicable, otherwise all

zeros. This should have the same value for a group of related ports.

The container is defined as the largest physical entity. For example,

all ports on HBAs on a host will have the same Node WWN. All ports

on the same storage subsystem will have the same Node WWN.

FcConnUnitPortHWState

(added from Mib3.0)

Type INTEGER

Product Mapping

Access R

Description The hardware detected state of the port. The values are defined as

follow:

unknown (1)

failed (2) port failed diagnostics

bypassed (3) FCAL bypass loop only,