FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manual (620-000131-620, April 2005)

2
2-104
E/OS SNMP Support Manual
McDATA SNMP Support
FcConnUnitInfo
Type SnmpAdminString
Product Mapping A textual description of the product.
Writable and persistent across IPL.
Access R/W
Description Information about this connectivity unit. This object value should be
persistent between boots.
FcConnUnitControl
Type INTEGER
Product Mapping Always return unknown (1) on read operation.
ResetConnUnitWarmStart (4), offlineConnUnit (5), and
onlineConnUnit (6) will be supported by PCP.
ResetConnUnitWarmStart (4) indicates IPL on the switch is
performed.
ResetConnUnitColdStart (3) is not supported.
Access R/W
Description This object is used to control the addressed connectivity unit.
NOTE: ‘ColdStart’ and ‘WarmStart’ are as defined in mib-2 and are not
meant to be a factory reset.
ResetConnUnitColdStart
the addressed unit performs a ‘ColdStart’
reset.
ResetConnUnitWarmStart
the addressed unit performs a
‘WarmStart’ reset.
OfflineConnUnit
: the addressed unit puts itself into an
implementation dependent ‘offline’ state.
In general, if a unit is in an offline state, it
cannot be used to perform meaningful
Fibre Channel work.
OnlineConnUnit
the addressed unit puts itself into an
implementation dependent ‘online’ state.
In general, if a unit is in an online state, it
is capable of performing meaningful
Fibre Channel work.