FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

config.zoning.showActive
133CLI Reference Guide for Directors and Edge Switches
maint Commands
The maint branch of the CLI command tree contains commands that relate to
maintenance activities.
The commands in the maint branch can be used only by the administrator.
Note that the maint.system.resetConfig command resets all
configuration data and non-volatile settings, including network information, to
their default values (factory settings). Management access may be lost until the
network information is restored.