High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (QUERY Verbs)
QUERY_LS
Chapter 4 743
Maximum propagation delay.
ls_detail.def_data.tg_chars.user_def_parm_1 through
def_data.tg_chars.user_def_parm_3
User-defined parameters, which include other TG
characteristics not covered by the above parameters.
Each of these parameters is set to a value in the range
0-255.
ls_detail.def_data.target_pacing_count
Numeric value between 1 and 32,767 inclusive
indicating the desired pacing window size.(Thecurrent
version of SNAplus2 does not make use of this value.)
ls_detail.def_data.max_send_btu_size
Maximum BTU size that can be sent.
ls_detail.def_data.ls_role
Link station role. This is normally set to
AP_USE_PORT_DEFAULTS, specifying that the LS role is
taken from the definition of the port that owns this LS.
If the LS has been defined with a specific LS role
overriding the port definition, this is one of the
following values:
AP_LS_PRI Primary
AP_LS_SEC Secondary
AP_LS_NEG Negotiable
ls_detail.def_data.max_ifrm_rcvd
Maximum of I-frames that can be received by this link
station before an acknowledgment is sent. This value is
in the range 0-127. When this field is zero, the value of
max_ifrm_rcvd from DEFINE_PORT is used as
default.
ls_detail.def_data.dlus_retry_timeout
Interval in seconds between second and subsequent
attempts to contact the DLUS specified in the
ls_detail.def_data.dlus_name and
ls_detail.def_data.bkup_dlus_name parameters.