High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (QUERY Verbs)
QUERY_LS
Chapter 4 735
parameters on DEFINE_PORT); it is ignored for
incoming calls or for PVC.
For Token Ring, Ethernet, FDDI:
ls_detail.def_data.dest_address.mac_address
MAC address of link station on adjacent node.
If the local and adjacent nodes are on LANs of different
types (one Token Ring or FDDI, the other Ethernet)
connected by a bridge, you will probably need to
reverse the bit order of the bytes in the MAC address.
For more information, see “Bit Ordering in MAC
Addresses”. If the two nodes are on the same LAN, or
on LANs of the same type connected by a bridge, no
change is required.
ls_detail.def_data.dest_address.lsap_address
Local SAP address of link station on adjacent node.
For all link types:
ls_detail.def_data.auto_act_supp
Specifies whether the link can be activated
automatically when required by a session. Possible
values are:
AP_YES
The link can be activated automatically.
AP_NO
The link cannot be activated automatically.
ls_detail.def_data.tg_number
Preassigned TG number, used to represent the link
when the link is activated. This parameter is used only
if the adjacent node is an APPN node ( adj_cp_type is
either AP_NETWORK_NODE or AP_END_NODE); it is ignored
otherwise. Zero indicates that the TG number is not
preassigned and is negotiated when the link is
activated.
ls_detail.def_data.limited_resource
Specifies whether this link station is to be deactivated