High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (QUERY Verbs)
QUERY_LS
Chapter 4734
AP_DSPU_XID
Downstream PU; SNAplus2 includes XID exchange in
link activation.
AP_DSPU_NOXID
Downstream PU; SNAplus2 does not include XID
exchange in link activation.
For SDLC:
ls_detail.def_data.dest_address
Address of the secondary link station.
The value of this parameter depends on how the port
that owns this LS is configured, as follows:
• If the port is used only for incoming calls
( out_link_act_lim on DEFINE_SDLC_PORT is
0), this parameter is reserved.
• If the port is switched primary and is used for
outgoing calls ( port_type is PORT_SWITCHED,
ls_role is LS_PRI, and out_link_act_lim on
DEFINE_SDLC_PORT is a nonzero value), this
parameter is set to either 0xFF to accept whatever
address is configured at the secondary station, or
set it to a 1-byte value in the range 0x01-0xFE (this
value must match the value configured at the
secondary station).
• For all other port configurations, this parameter is
set to a 1-byte value in the range 0x01-0xFE to
identify the link station. If the port is primary
multi-drop ( ls_role on DEFINE_SDLC_PORT is
LS_PRI and tot_link_act_lim is greater than 1),
this address must be different for each LS on the
port.
For QLLC:
ls_detail.def_data.dest_address
Destination address of link station on the adjacent
node. This parameter is used only for SVC outgoing
calls (defined by the vc_type parameter in the
link-specific data, and by the link activation limit