High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_PORT
Chapter 3 355
Timeout in milliseconds within whichSNAplus2
expects a response to any I-frames sent to the adjacent
link station.
sap_spec_data.p_bit_timeout
Time in milliseconds that SNAplus2 waits for a
response to a frame sent with the POLL bit set.
sap_spec_data.t2_timeout
Period in milliseconds that SNAplus2 will withhold a
response to a received I-frame to allow further I-frames
to be received and acknowledged with the same RR,
thus reducing acknowledgment traffic. At the latest,
SNAplus2 will send the acknowledgment after this
period, but may send the acknowledgment before this
period is over.
sap_spec_data.rej_timeout
Time in seconds during which SNAplus2 expects to
receive a response to an REJ frame.
sap_spec_data.busy_state_timeout
Time in seconds that SNAplus2 waits for indication of
clearance of a busy condition at the adjacent link
station.
sap_spec_data.idle_timeout
RR keep-alive interval in seconds for an otherwise idle
link.
sap_spec_data.max_retry
Maximum permitted number of retries when waiting
for any response or busy state to clear.
Returned Parameters: Successful Execution
If the verb executes successfully, SNAplus2 returns the following
parameters:
primary_rc AP_OK