High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_PORT
Chapter 3348
milliseconds.
np_rcv_timer_retry
The nonproductive receive retry limit is used in
conjunction with the timeout value to provide the
overall time before an outage message is issued.
A value of 0xFFFF indicates an unlimited retry count.A
value of 0x0001 indicates that an outage should be
generated after the first timer expiry.
write_timer
The write timeout corresponds to the maximum time
allowed to transmit a complete frame. This is usually
set in conjunction with the retry limit to give a long
timeout before outage of about 30s. The timer is
specified in milliseconds.
write_timer_retry
The write timeout retry limit is used in conjunction
with the timeout value to provide the overall time
before an outage message is issued.
A value of 0xFFFF indicates an unlimited retry count.A
value of 0x0001 indicates that an outage should be
generated after the first timer expiry.
link_conn_timer
The link connection timeout together with the retry
limit corresponds to the time interval after which
SNAplus2 fails an attempt to activate an LS because it
has not detected that DSR has been raised. The timer
is specified in milliseconds.
link_conn_timer_retry
The link connection retry limit specifies the number of
times to test for link connection before failing an
attempt to activate an LS.
A value of 0xFFFF indicates an unlimited retry count.A
value of 0x0001 indicates that an outage should be
generated after the first timer expiry.
pri_fdplx