High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LU_0_TO_3_RANGE
Chapter 3304
Timeout for the LU specified in seconds. If the timeout
is set to a nonzero value and the user of the LU
specified allow_timeout on the
DEFINE_DOWNSTREAM_LU verb, then the LU is
deactivated after the PLU-SLU session is left inactive
for the specified period and one of the following
conditions exist:
• The session passes over a limited resource link.
• Another application requests to use the LU before
the session is used again.
If the timeout is set to 0 (zero), the LU is not
deactivated.
name_attributes
Attributes of the LUs to be defined. Possible values are:
AP_NONE
LU names have numbers corresponding to the NAU
numbers.The numbers are specified in decimal and the
base_name parameter can only be 5 characters.
AP_USE_BASE_NUMBER
Start naming the LUs in the range from the value
specified in the base_number parameter.
AP_USE_HEX_IN_NAME
Add the extension to the LU name in hex rather than
decimal. The base_name parameter can contain 6
characters if this value is specified.
base_number
If AP_USE_BASE_NUMBER is specified in the
name_attributes parameter, specify a number from
which to start naming the LUs in the range. This value
will be used instead of the value of the min_nau
parameter.
Returned Parameters: Successful Execution
If the verb executes successfully, SNAplus2 returns the following