High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LU_0_TO_3_RANGE
Chapter 3 303
priority
LU priority when sending to the host. Possible values
are:
AP_NETWORK
AP_HIGH
AP_MEDIUM
AP_LOW
lu_model
Type of the LUs. Possible values are:
AP_3270_DISPLAY_MODEL_2
AP_3270_DISPLAY_MODEL_3
AP_3270_DISPLAY_MODEL_4
AP_3270_DISPLAY_MODEL_5
AP_PRINTER
AP_SSCP_PRINTER
AP_RJE_WKSTN
AP_UNKNOWN (LU type will be determined when the
session to the host is established)
If the host system supports DDDLU (Dynamic
Definition of Dependent LUs), and this parameter is
set to any value other than AP_UNKNOWN, SNAplus2
will define the LUs dynamically at the host when the
communications link to the host is established. If the
host does not support DDDLU, or if this parameter is
set to AP_UNKNOWN, the LUs must be included in the
host configuration.
sscp_id
Specifies the ID of the SSCP permitted to activate this
LU. Specify a value in the range 0-65,535. If this
parameter is set to 0 (zero), the LU can be activated by
any SSCP.
timeout